COVERWORX EXTRAS
COVERWORX RECREATIONAL ARCHITECTURE
EXTRAS- Site Furnishings
Since 1987, Coverworx has provided a combination of the finest quality craftsmanship and unique design to bring you our full line of accessories.
Special request(s)? Coverworx specializes in custom fabrications.
CENTER POST
FRAME: 3 1/2” O.D. galvanized pipe and 2 7/8” O.D. galvanized pipe. Permanent mount.
SLATS: 2” x 10” nominal. Available with #1 pressure treated pine or anodized aluminum.
FINISH: Galvanized pipe with cold galvanizing finish on all welds.
WORX TABLE
END SUPPORTS: 3/8” x 4 ½” steel bar with choice of 2 3/8” O.D. or 2 7/8” O.D. steel pipe.
BRACING: 1 5/16” O.D. steel pipe and 11 gauge formed steel angle.
SLATS: 3” x 4” and 3” x 6” nominal recycled plastic.
FINISH: Polyester powder coated.
ECONOMY
FRAME:1 5/8” O.D. galvanized pipe
BRACES: 1 5/16” O.D. galvanized pipe.
SLATS: 2” x 10” nominal. Available with #1 pressure treated pine, anodized aluminum, or recycled plastic.
FINISH: Galvanized pipe with cold galvanizing finish on all welds.
FLAIR TOP
TOP RING: 5/8” diameter steel bar.
VERTICAL MEMBERS: ¼” x 1 ½” steel bar.
BASE RING: ¼” x 3” steel bar.
COVER: 14 gauge spun steel with vinyl coated steel cable.
LINER: 32 gallon plastic.
FINISH: Polyester powder coated. May be freestanding or anchored to surface.
ASH URNS
VERTICAL MEMBERS: ¼” x 1 ½” steel bar.
BASE RING: ¼” x 2” steel bar.
ASH TOP: 10” diameter spun aluminum with vinyl coated steel cable.
FINISH: Polyester powder coated. May be freestanding or anchored to surface
16 SLAT
FRAME: 1/4” x 2” and 1/4” x 1” steel bar.
SUPPORT: 2 3/8” O.D. steel pipe.
SLATS: 2” x 4” nominal. Available with #1 pressure treated pine, redwood, Douglas Fir, or recycled plastic.
LINER: 22 gallon or 32 gallon plastic.
FINISH: Polyester powder coated frame. Receptacle factory assembled.
TRASH CANS
FRAME: 1/8” x 1” steel bar and 3/8” diameter steel bar.
SLATS: 1” x 3” nominal. Available with #1 pressure treated pine or redwood.
LINER: 22 gallon or 32 gallon plastic.
FINISH: Frame and support powder coated black. Receptacle factory assembled.
GROUND PARK GRILL
FIREBOX: 3/16” steel plate, 360° rotation, 15” x 20” x 10” high.
COOKING GRATE: 1/2” diameter steel bars with 5/8” diameter support handles. Equipped with cool grips and adjusts to four different height settings. 300-square-inch cooking area.
FINISH: Heat resistant non-toxic black enamel.
DOUBLE STANDING
FIREBOX: 3/16” steel plate, 360° rotation, 24” x 36” x 10” high.
COOKING GRATE: 1/2” diameter steel bars with 5/8” diameter handles. Equipped with cool grips and adjusts to four different height settings. 864 total square-inch cooking area.
FINISH: Heat resistant non-toxic black enamel.
ADJUSTABLE CAMPING
FIREBOX: 3/16” steel plate. Flips back for servicing.
COOKING GRATE: 1/2” diameter steel bars with 5/8” diameter support handles. Equipped with cool grips and adjusts to four different height settings. 285-square-inch cooking area.
FINISH: Heat resistant non-toxic black enamel.
BACKLESS STEELWORX
SUPPORTS: ½” x 2” steel bar. One-piece welded unit. May be surface mount or freestanding.
SEAT SURFACE: ¼” x 1 ½” steel bar and 1 5/16” O.D. steel pipe.
FINISH: Polyester powder coated.
BLEACHER
SUPPORTS: 2 3/8” O.D. galvanized pipe.
SLATS: 2” x 10” nominal. Available with #1 pressure treated pine or anodized aluminum.
FINISH: Galvanized pipe with cold galvanizing finish on welds.
Custom lengths available upon request and availability. Permanent or portable supports. Available with or without back.
CENTER CAST
SUPPORTS: Cast iron.
SLATS: 2” x 4” nominal. Available with #1 pressure treated pine, redwood, Douglas Fir, Pau Lope®, or recycled plastic.
FINISH: Polyester powder coated supports.
Bench may be free-standing or surface mounted.Economy
SUPPORTS: 2 3/8” O.D. galvanized pipe with ends capped.
SLATS: 2” x 4” nominal. Available with #1 pressure treated pine, redwood, Douglas Fir, Pau Lope®, anodized aluminum, or recycled plastic.
FINISH: Galvanized pipe with cold galvanizing finish on all welds.
PIPE WRAP
FRAME: 2 7/8” O.D. steel pipe with welded 3/8” x 3” steel bar contour seat supports. Permanent installation.
SLATS: 2” x 4” nominal. Available with #1 pressure treated pine, redwood, Douglas Fir, Pau Lope®, or recycled plastic.
FINISH: Polyester powder coated frame.
ECONOMY
SUPPORTS: 2 3/8” O.D. galvanized pipe with ends capped.
SLATS: 2” x 4” nominal. Available with #1 pressure treated pine, redwood, Douglas Fir, Pau Lope®, anodized aluminum, or recycled plastic.
FINISH: Galvanized pipe with cold galvanizing finish on all welds.
STEELWORX BENCH
SUPPORTS: 1/2” x 2” steel bar. One-piece welded unit. May be surface mounted or free-standing.
SEAT SURFACE: 1/4” x 1 1/2” steel bar and 1 5/16” O.D. steel pipe.
FINISH: Polyester powder coated. May be free-standing or surface mounted.
STREET SCAPE
FRAME: 2” x 1” x 11 gauge wall and 2” x 2” x 11 gauge wall steel tubing. One-piece welded unit.
SEAT SURFACE: 1” square x 11 gauge wall steel tubing.
DECORATIVE PANEL: 3/8” thick steel.
FINISH: Polyester powder coated. Choice of permanent, surface mount or free-standing supports
VICTORIAN
SUPPORTS: Heavy-duty cast iron.
CROSS BRACE: 1 5/16” O.D. galvanized pipe.
CENTER STRAP: 1/4” x 2” steel bar.
SLATS: 2” x 3” nominal. Available with #1 pressure treated pine, redwood, Pau Lope®, or Douglas Fir.
HARDWARE: Stainless Steel.
FINISH: Polyester powder coated frame.
IN-LINE CURVE
FRAME: 1 5/8” O.D. galvanized pipe with ends capped.
SPOKES: 1/2” diameter hot dip galvanized solid steel.
HARDWARE: Bright zinc plated.
FINISH: Natural galvanized pipe with cold galvanizing finish on all welds.
U-PIPE STRAIGHT
FRAME: 1 5/8” O.D. and 1 5/16” O.D. galvanized pipe with ends capped.
SPOKES: 1/2” diameter hot dip galvanized solid steel.
HARDWARE: Bright zinc plated.
FINISH: Natural galvanized pipe with cold galvanizing finish on all welds.
S-CURVED BIKE
RACK: 2 3/8” O.D. galvanized pipe. Available in permanent or surface mount.
FINISH: Available in natural galvanized pipe or polyester powder coated finish. Loop bike racks also available in stainless steel